Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

Bigger Flow for Bigger Power: Introducing FuelTech's New FT Injector 1020 lb/hr GEN 2

August 12, 2024

FuelTech is proud to announce the introduction of the FT Injector 1020 lb/h GEN 2, the newest addition to our FT Injector line of performance fuel injectors. Designed for extreme racing applications, the new fuel injector is engineered to meet the demands of high-horsepower engines, ensuring precise fuel delivery and unmatched performance. 

Key Features of the FT Injector 1020 lb/hr GEN 2 Fuel Injector

  1. Unparalleled Flow Rate: The newest FT Injector boasts an impressive flow rate of 1020 pounds per hour (lb/hr) at 90 psi, making it one of the highest capacity fuel injectors on the market. This injector is perfect for engines pushing serious power, ensuring that fuel supply never holds you back.
  2. Precision Engineering: FuelTech's FT Injector line has always prioritized precision and reliability. Designed for racing, these injectors deliver the exact amount of fuel you want every time, helping you run closer to the edge without overheating or damaging your engine. This accuracy keeps your air-fuel ratios spot on, boosting combustion efficiency and performance under extreme conditions.
  3. Versatility and Compatibility: Like all FuelTech fuel injectors, the FT Injector 1020 lb/hr GEN 2 is compatible with all ECUs and works with various types of fuel, including gasoline, ethanol, methanol/alcohol, nitropropane, MTBE, and ETBE. Whether you're driving a turbocharged dragster, a high-boost rally car, or an endurance racer, FT Injectors have got you covered.
  4. Reliable Connectors: All FT Injectors use standard EV1 connectors with silver plated terminals for increased conductivity. However, the injector plugs have been flipped backwards to create positive engagement on the locking mechanism, keeping them in place, even under the massive vibrations of an alcohol-fueled engine. 
  5. Enhanced Fuel Atomization: The FT Injector's advanced design ensures top-notch fuel atomization, resulting in finer droplets and a more uniform air-fuel mixture. This means more efficient combustion and higher power output. 
  6. 1020 Redesigned for Improved Performance and Longevity: The new 1020 injector has been completely redesigned to enhance performance and durability. It features harder steel construction to maintain precision over time for increased longevity and a new design with only one moving part—the plunger—reducing potential failure points. Additionally, it’s designed to resist fuel restriction from contaminants, although we still recommend using a fuel filter on all racing fuel systems.

Why Choose the FT Injector 1020 lb/hr?

Optimized for Extreme Applications: The FT Injector 1020 lb/hr GEN 2 isn't just another fuel injector; it's a game-changer for your engine's performance. Its high flow rate and precision make it ideal for applications where max power and reliability are non-negotiable.

FuelTech's Reputation for Excellence: FuelTech is known for top-quality engine management solutions and engine components, and the FT Injector 1020 lb/hr GEN 2 is no exception. The entire FT Injector line represents FuelTech's commitment to innovation and excellence, giving racers products they can rely on. 

Simplified Tuning and Integration: Thanks to their compatibility with all ECUs, integrating FT Injectors into your setup is a breeze. Plus, FuelTech offers a handy Fuel Injection Calculator to help you determine the best injector size for your engine. Check it out here

Full Line of FT Injectors

FuelTech's FT Injector line includes a comprehensive range of fuel injectors designed for racing, offering both low impedance and high impedance options.

FuelTech FT Injectors - Fuel Injectors designed for racing! 

 

Low impedance, or peak-and-hold injectors:

  • 320 lb/hr
  • 520 lb/hr
  • 720 lb/hr
  • 820 lb/hr
  • 020 lb/hr

High impedance, or saturated fuel injectors:

  • 80 lb/hr
  • 120 lb/hr
  • 170 lb/hr
  • 240 lb/hr

To explore the full line of FT Injectors, visit FuelTech's Injector Page. 

Conclusion

FuelTech's new FT Injector 1020 lb/hr sets a new standard in fuel delivery for high-performance and racing engines. With its high flow rate, precision engineering, and robust construction, it's the go-to choice for those looking to max out their engine's potential. Whether you're a professional racer or a hardcore enthusiast, the FT Injector 1020 lb/hr is your ticket to unlocking serious performance on the track.

 




Also in FuelTech Blog

FuelTech’s EGT-4 for Enhanced Performance Monitoring
FuelTech’s EGT-4 for Enhanced Performance Monitoring

December 02, 2024

FuelTech’s EGT-4 (Exhaust Gas Temperature 4 Channel) module is designed to provide accurate and real-time data for up to four K-type thermocouple sensors via the FuelTech ECU’s CAN bus network.

Read More

SwitchPanels: Streamlined Control for High-Performance Builds
SwitchPanels: Streamlined Control for High-Performance Builds

December 02, 2024

When it comes to high-performance vehicle builds, having efficient, intuitive control over your systems is crucial. FuelTech’s SwitchPanels are designed to provide a seamless interface for managing key vehicle functions, delivering reliability and ease of use to racers and enthusiasts alike

Read More

FuelTech the Brains for Stryten Energy’s Reluctance Jeep: A Hybrid Electric-Diesel
FuelTech the Brains for Stryten Energy’s Reluctance Jeep: A Hybrid Electric-Diesel

November 13, 2024

The Reluctance Jeep, a cutting-edge hybrid-electric concept vehicle, was unveiled by Stryten Energy at the 2024 SEMA Show. The hybrid system, built by Bruiser Conversions, is managed by FuelTech FT550 ECUs.

Read More