FT400 EFI System

3010003318

Shipping Cut-Off:  USPS 9:30am EST / UPS 3:00pm EST


Features

Not recommended for high performance V8 applications. 
Please refer to our FT500LITE, FT500, FT550, and FT600 ECU for this type of application.

  • 4.3” color touchscreen TFT – non reflective
  • Electronic throttle control (Drive-by-wire)
  • Distributor type and crank trigger ignition control
  • 6 ignition outputs to control wasted spark or coil on plug systems
  • 24 channel internal datalogger (FuelTech USB-CAN Converter needed – sold separately)
  • Idle speed control by timing,step motor or by solenoid
  • Plug and Play connection to Racepak IQ3 dash *
  • Fuel table tuning aid **
  • Closed loop lambda control **
  • Active traction control (FuelTech GearController needed – sold separately)

    * Using integrated CAN port
    **FuelTech WB-O2 Meter Nano or WB-O2 Datalogger needed – sold separately

    Product intended for off road race-only, ground vehicle use only. FuelTech is not responsible for any misuse of these products. Check with your local authorities regarding highway laws in your area.

     

    Technical Description

    • Rotary and piston engine compatible (2-3 rotors, 1 to 12cyl)
    • Ignition and fuel mapping directly on the ECU or through PC (Software FuelTech ECU Manager)*
    • 13 input channels (IAT, ECT, oil and fuel pressure, O2 sensor, TPS, electronic pedal – 2 channels, electronic throttle, A/C, two-step, RPM and cam sensor)
    • 2 injectors output that control up to 12 high impedance injectors
    • 7 auxiliary outputs (fuel pump, fan, variable camshaft, A/C, etc.)
    • Built-in MAP Sensor (87 psi)
    • 5 internal memory files
    • Boost control by RPM through N75 valve
    • Progressive nitrous injection (wet/dry)
    • Screen bright and buzzer Volume control
    • Password protection
    • Map backups on PC*
    • Firmware update over the internet*
    • Engine protection through 10 configurable alerts
    • Time based rev limiter
    • ECU Language according to your purchase region (no future language change is possible)
    • Dimensions: 140mm x 80mm x 30mm

    *FuelTech USB-CAN Converter needed – sold separately

    Contents of Packaging

    • 1 FT400 EFI System
    • 1 Operation and installation guide
    • 1 10ft FT400 unterminated main harness (optional)
    • 1 10ft FT400 unterminated auxiliary harness (optional)
    • 1 Nylon hose for MAP Sensor
    • 1 Smart Clip Bracket & Hardware
    • 1 promotional kit (including a pen, a keychain and a sticker kit)