Menu
0
Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.
Home   All   Dual Power Driver Connector Kit
 

Dual Power Driver Connector Kit

5011100562

$59.00

Shipping Cut-Off:  USPS 9:30am EST / UPS 3:00pm EST

  • This kit is designed to make your install simpler and more serviceable if need be.
  • This kit contains:
    • 1X 4 way DTP kit (both sides)
    • 1X 4 way DTM kit (both sides)
    • 1X 2 way DTM kit (both sides)
  •  FT Dual Power Driver Manual

RECOMMENDED INSTALL INSTRUCTIONS

     

    4-way cable from DPD to DTP 4 pin

        • DTP 4 pin female
          • pin 1- Large red wire from DPD
          • pin 2- Large black wire from DPD
          • pin 3- Large blue wire from DPD
          • pin 4- Large white wire from DPD

     

        • DTP 4 pin male
          • pin 1- 12V from fuse (40A max)
          • pin 2- Battery negative
          • pin 3- eGate large red wire (motor +)
          • pin 4- eGate large white wire (motor -)

     

    2-way cable from DPD to DTM 2 pin

        • DTM 2 pin female
          • pin 1- Small red wire from DPD
          • pin 2- Small white wire from DPD

     

        • DTM 2 pin male
          • pin 1- ODD numbered yellow output (1, 3, 5, or 7)
          • pin 2- EVEN numbered yellow output (2, 4, 6, or 8)

     

    eGate sensor wires to DTM 4 pin

        • DTM 4 pin female
          • pin 1- Small red wire from eGate (5V+)
          • pin 2- Small black wire from eGate (sensor ground)
          • pin 3- Small white wire from (position signal)
          • pin 4- Small orange/yellow from eGate (temperature signal)

     

        • DTM 4 pin male
          • pin 1- Green/red stripe from ECU (5V+)
          • pin 2- Green/black stripe from ECU (sensor ground)
          • pin 3- Any available white input wire from ECU (position signal)
          • pin 4- Any available white input wire from ECU (temperature signal)

     

    NOTE- the small blue wire from eGate multi core wire is not used