Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

Setting Up Alerts and Safeties

April 01, 2020

1. In the FTMANAGER software, go to your quick access panel on the left, scroll all the way down and click ALERT SETTINGS

2. From here, check which alerts and safeties you want to enable.

3. You have three options for an alert or safety. Engine Shut OFF, Warning Only and Engine Safe Mode. (This limits the engine RPM to a pre-programmed value).

Always remember to set up important safeties to PROTECT YOUR ENGINE!




Also in Articles

First to the 8s—FuelTech C8 Project Car Drops the Record Even Lower
First to the 8s—FuelTech C8 Project Car Drops the Record Even Lower

October 23, 2021

It is Official—the FuelTech C8 Corvette is the first to eclipse the 8-second zone!

Read More

ProCharger-HEMI | No Prep Kings | Johnny Quick
ProCharger-HEMI | No Prep Kings | Johnny Quick

September 28, 2021

Be sure to keep an eye on John Quick when Street Outlaws: No Prep Kings season kicks off this fall on Discovery Channel as he will be taking on some of the most notorious big tire cars in search of the fame and fortune that goes with winning at No Prep Kings.

Read More

First in the 7s | 1,106 WHP | Toyota MR2 | BoostedBoiz
First in the 7s | 1,106 WHP | Toyota MR2 | BoostedBoiz

September 23, 2021

It isn’t often that a 2.0L Honda K-series is bolted to the dyno at FuelTech USA and it definitely isn’t a frequent occurrence that the same 4-cylinder engine belts out an insane 1,106 WHP with relative ease

Read More