Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

Setting Up The Pro Nitrous Feature

March 29, 2020

PRODUCTS YOU WILL NEED:

👉 Nitrous Solid State Relay

👉 PS-1500 Pressure Sensor

1. To begin, open the FTManager and open the Map Options in the task bar.

2. Under Drag Race features, select Pro-Nitrous

3. In the quick access panel, find Pro-Nitrous under drag race features.

4. Select how you want to enable the pro-nitrous feature and program the minimum and maximum RPMs allowed.

5. Click Pro-Nitrous Timers and Delays to set up how many stages you have and when they will activate.

6. Program the amount of Fuel Enrichment needed for each stage of nitrous.

7. Program the required amount of timing to be removed for each stage.

 




Also in Articles

First to the 8s—FuelTech C8 Project Car Drops the Record Even Lower
First to the 8s—FuelTech C8 Project Car Drops the Record Even Lower

October 23, 2021

It is Official—the FuelTech C8 Corvette is the first to eclipse the 8-second zone!

Read More

ProCharger-HEMI | No Prep Kings | Johnny Quick
ProCharger-HEMI | No Prep Kings | Johnny Quick

September 28, 2021

Be sure to keep an eye on John Quick when Street Outlaws: No Prep Kings season kicks off this fall on Discovery Channel as he will be taking on some of the most notorious big tire cars in search of the fame and fortune that goes with winning at No Prep Kings.

Read More

First in the 7s | 1,106 WHP | Toyota MR2 | BoostedBoiz
First in the 7s | 1,106 WHP | Toyota MR2 | BoostedBoiz

September 23, 2021

It isn’t often that a 2.0L Honda K-series is bolted to the dyno at FuelTech USA and it definitely isn’t a frequent occurrence that the same 4-cylinder engine belts out an insane 1,106 WHP with relative ease

Read More