About the product:

Fully Programmable ECU for rotary and piston engines with 4,3" touchscreen display.

Product Code: 2639

Not recommended for high performance V8 applications.
Please refer to our FT500LITE, FT500, and FT600 ECU for this type of application.

- 4.3” color touchscreen TFT – non reflective
- Distributor type and crank trigger ignition control
- 5 ignition outputs to control wasted spark or coil on plug systems
- 19 channel internal datalogger (FuelTech USB to CAN Converter needed – sold separately)
- Idle speed control by timing or by solenoid
- Plug and Play connection to Racepak IQ3 Dashboard *
- Active traction control (FuelTech GearController needed – sold separately)

* Using integrated CAN port

Download the FT ECU Comparison Chart!

*** $929.00 - FT350 w/o harness
*** $998.00 - FT350 w/ 10ft unterminated harness 


Product intended for off road race-only, ground vehicle use only. FuelTech is not responsible for any misuse of these products. Check with your local authorities regarding highway laws in your area.

Product Code: 2639

- Rotary and piston engine compatible (2 rotors, 1 to 12cyl)
- Ignition and fuel mapping directly on the ECU or through PC (Software FuelTech ECU Manager) *
- 9 input channels (IAT, ECT, oil and fuel pressure, O2 sensor, TPS, two-step, RPM and cam sensor – not all sensors available at the same time)
- 2 injectors output that control up to 12 high impedance injectors
- 4 auxiliary outputs (fuel pump, fan, variable camshaft, etc.)
- Built-in MAP Sensor (87 psi)
- 5 Internal memory files
- Boost control by RPM through N75 valve
- Progressive nitrous injection (wet/dry)
- Screen bright and buzzer volume control
- Password protection
- Map backups on PC *
- Firmware update over the internet *
- Engine protection through 10 configurable alert
- Time based rev limiter
- ECU Language according to your purchase region (no future language change is possible)
- Dimensions: 140mm x 80mm x 30mm

For detailed information, please check this unit instructions manual, available for download in our website.

* FuelTech USB to CAN Converter needed – sold separately

$ 929.00

Out of stock.
Estimated shipping: 2-4 weeks.

Shipping Cut-off:

USPS 9:30am EST
UPS 3:00pm EST





    FT350 EFI