About the product:

Fully programmable ECU with OLED display, crank trigger and distributor control.

Product Code: 2635

- 16x2 characters OLED display
- Distributor type and crank trigger ignition control
- 5 ignition outputs to control wasted spark or coil on plug systems
- 19 channel internal datalogger (FuelTech USB-CAN Converter needed – sold separately)
- Idle speed control by timing or by solenoid
- Plug and Play connection to Racepak IQ3 Dashboard *
- Active traction control (FuelTech GearController needed – sold separately)

* Using integrated CAN port

*** $679.00 - FT300 w/o harness
*** $748.00 - FT300 w/ 10ft unterminated harness 


Product intended for off road race-only, ground vehicle use only. FuelTech is not responsible for any misuse of these products. Check with your local authorities regarding highway laws in your area.

Product Code: 2635

- Piston engine compatible (1 to 12cyl)
- Ignition and fuel mapping directly on the ECU or through PC (Software FuelTech ECU Manager) *
- 9 input channels (IAT, ECT, oil and fuel pressure, O2 sensor, TPS, two-step, RPM and cam sensor – not all sensors available at the same time)
- 2 injectors output that control up to 12 high impedance injectors
- 4 auxiliary outputs (fuel pump, fan, variable camshaft, etc.)
- Built-in MAP sensor (87 psi)
- 5 internal memory files
- Boost control by RPM through N75 valve
- Progressive nitrous injection (wet/dry)
- Password protection
- Map backups on PC *
- Firmware update over the internet *
- Engine protection through 10 configurable alerts
- Time based rev limiter
- 10 or 20ft wire harness
- ECU Language according to your purchase region (no future language change is possible)
- Dimensions: 140mm x 80mm x 30mm

For detailed information, please check this unit instructions manual, available for download in our website.

* FuelTech USB-CAN Converter needed – sold separately

$ 679.00





    FT300 EFI